AC only, and self-powered (B) comes standard configured with high output LED technology, 120/277V input. Nickelcadmium batteries provide a minimum 90 minutes of emergency duration. Optional 120 minute duration battery is available. Solid state charger & transfer.
The ZJE is constructed from durable 20 gauge steel. The ZJE comes standard with a white powder coat finish. Available in custom powder coat finishes (please specify). Single, double or universal face versions must be specified. Universal mounting pattern and key hole slots are stamped into the back plate. Removable chevrons are standard. The selfpowered version (B) comes standard with an external LED status indicator and test switch.
BATTERY: The ZJE uses a maintenance free, sealed Nickel-Cadmium battery providing a minimum emergency duration of 90 minutes. An optional 120 minute NickelCadmium battery is available. Recharge time of the battery is twenty four (24) hours. The battery operating temperature is from 50°F up to 104°F (10°C up to 40°C).
CIRCUIT: The ZJE is configured with high-output, highefficiency LED’s. LED is standard with 120/277V input. All LED versions consume 2W or less nominal power.
The design of the ZJE exit provides a clean and attractive appearance. The 20 gauge steel frame contains no external holes or slots adding to the clean look while eliminating unwanted light leaks, can be securely mounted in any application. The face and back plates are mounted into the frame using a channel system that permits simple and speedy removal during installation.
The ZJE is designed to operate on battery power in the event of a regular / mains power failure. Both the battery and charger are completely contained within the standard enclosure. There are no external components and no alterations made to the external dimensions of the standard sign. The ZJE utilizes a solid state transformer that eliminates the possibility of relay failure due to particle build up on the relay. Status is easily determined via an LED that indicates AC-ON. A push button test switch allows maintenance personnel to quickly confirm the operational status of the exit on AC fail.
The FME Autotest diagnostic system features continuous monitoring of the units main components (battery, charger, transformer, lamps & LED’s) and providing instant visual verification of the status.
- Monitor battery disconnection, charger failure, lamp failure, LED failure and transformer fault every 5 seconds without discharging the battery.
- Automatically indicates lamp, battery and charger status by dual-color LED lamp.
- Factory preset Autotest does not need to be field adjusted or reset for proper operation. .
- Verifies battery disconnect, charger board failure, lamp failure, LED failure and transformer failure every 5 seconds.
- One (1) minute Autotest every month.
- Thirty (30) minute Autotest every six (6) months.
- Ninety (90) minute Autotest every twelve (12) months.
The TEMPE comes with a 5-year factory warranty. Deliberate damage, misuse, improper installation effectively cancel the warranty