SPECIFICATIONS: INTERNAL
The TEC2 has a 120/277V input. The maintenance free, sealed nickel cadmium batteries provide a minimum 90 minutes of emergency duration. Optional 120 minutes duration battery is available. Solid state charger, auto-test, and transfer are standard on self powered units. The self powered version (B) comes standard with an external LED status indicator and test switch.
SPECIFICATIONS: EXTERNAL
The TEC2 is constructed from .420” thick, heavy duty cast aluminum. The faceplates are protected by high abuse clear polycarbonate, which is recessed into the housing. Tamper resistant screws are standard. The TEC2 comes finished in either black or white, with matching stencil faces. Single, double or universal face versions must be specified.
SPECIFICATIONS: ELECTRICAL
BATTERY:The TEC2 is designed with a maintenance free, sealed nickel-cadmium battery providing a minimum emergency duration of 90 minutes. Optional 120 minute nickelcadmium batteries are available. Recharge time of the battery is twenty-four [24] hours. The maximum battery operating temperature is +45°C and the minimum is +10°C without internal heater/thermostat option, with the internal heater/ thermostat the minimum operating temperature is -20°C.
CIRCUIT:The TEC2 is configured with high output LEDs lamps. LED is standard with 120/277V input. All LED versions consume less than 2 watts nominal power. The charger also has brownout and short circuit protection.
SPECIFICATIONS: MECHANICAL
The TEC2 is constructed of extra heavy duty cast aluminum with a 1/8” thick polycarbonate protective shield. Tamper resistant screws are standard. Field adjustable chevrons are standard. The TEC2 is standard in an attractive matte black finish. The polycarbonate face shield is recessed into the housing making the TEC2 one of the most rigid, yet attractive high abuse signs on the market.
AUTOTEST
The TEC2 can be configured with the FME AutoTest diagnostic system. Featuring continuous monitoring of the units main components (battery, charger, transformer & LEDs) and providing instant visual verification of the status.
VANDAL RESISTANT DESIGN
The heavy duty design and low profile of the TEC2 exit warns potential vandals that this is no regular sign. The stencil is protected by a 1/8” thick, impact resistant polycarbonate shield that is recessed into the housing and fastened with 4 tamper resistant screws. The TEC2 offers a contemporary look and durability like no other.
SELF-POWERED
The TEC2 self-powered series (B) is designed to operate on battery power in the event of a power failure. Both battery and charger are completely contained within the standard enclosure. The TEC2 self-powered series (B) utilizes a solid state transfer technology that eliminates the possibility of relay failure due to particle build up on the relay. status is easily determined via an LED that indicates AC-ON.
SANITATION / NSF LISTED
The FME TEC2 is sanitation approved. The Intertek verified splash zone listing is certified to the NSF standard 2, meeting the rigorous sanitation, electrical safety and performance standards of food service environments.
WARRANTY:
The TEC2 comes with a 5-year factory warranty. Deliberate damage, misuse, improper installation effectively cancel the warranty.
FME Lighting | 18585 Coastal Highway | Unit 10 PMB 104 | Rehoboth Beach Delaware, 19971
877-234-8460 | Fax: 302-650-1901 | info@fmelighting.com